Care and Maintenance
If the spot has dried, try lightly brushing or scraping off the residue. Wipe surface with water.
If a spot still remains, apply a mild detergent to fabric with a light mist.
Work area using soft brush or edge of spoon from outside of spot towards the middle.
Allow solution to work for approximately one minute.
Remove with clean water or blot with clean soft towel.
Repeat steps 3-5 as necessary until spot is removed.
Rinse with clear lukewarm water and blot with clean soft cloth as final step.
NOTE: If necessary due to heavy soiling, insert may be removed and hand washed with a mild detergent. Lay insert flat to dry.